The Synthesis of Unusual Organic Molecules Using Cyclic Peroxides. New synthetic methods (3)

The photodecarboxylation of malonyl peroxides into α-lactones^[1] and the thermal conversion of the 1,4-endo-peroxide 4,5-epoxy-3,6-epidioxy-1-cyclohexene into the novel benzene trioxide^[2] are two recent examples of the potential of cyclic peroxides in the synthesis of unusual organic molecules. The former transformation entails a fragmentation, the latter a rearrangement process. Most reported examples fall into one of these two gross reaction types. Of the numerous examples that have been reported in the literature during the last two decades, only those shall be focused on that lead to unusual compounds or constitute efficient syntheses of known compounds, in order to stress the convenience of cyclic peroxides in the synthesis of organic compounds.     

An analysis of avidin, biotin and their interaction at attomole levels by voltammetric and chromatographic techniques

The electroanalytical determination of avidin in solution, in a carbon paste, and in a transgenic maize extract was performed in acidic medium at a carbon paste electrode (CPE). The oxidative voltammetric signal resulting from the presence of tyrosine and tryptophan in avidin was observed using square-wave voltammetry. The process could be used to determine avidin concentrations up to 3 fM (100 amol in 3 l drop) in solution, 700 fM (174 fmol in 250 l solution) in an avidin-modified electrode, and 174 nM in a maize seed extract. In the case of the avidin-modified CPE, several parameters were studied in order to optimize the measurements, such as electrode accumulation time, composition of the avidin-modified CPE, and the elution time of avidin. In addition, the avidin-modified electrode was used to detect biotin in solution (the detection limit was 7.6 pmol in a 6 l drop) and to detect biotin in a pharmaceutical drug after various solvent extraction procedures. Comparable studies for the detection of biotin were developed using HPLC with diode array detection (HPLC-DAD) and flow injection analysis with electrochemical detection, which allowed biotin to be detected at levels as low as 614 pM and 6.6 nM, respectively. The effects of applied potential, acetonitrile content, and flow rate of the mobile phase on the FIA-ED signal were also studied.     

Examining the role of surfactant packing in phase transformations of periodic templated silica/surfactant composites

In this work, we examine the role of curvature and surfactant packing in controlling the structure of periodic silica/surfactant composites by driving such materials through a transformation from a hexagonal to a lamellar phase. We focus on how the interplay of desired packing and volume constraints dictates the resulting structures. In general, surfactants expand in a complex way upon heating, and this can cause a change in the optimal packing geometry. However, the presence of a rigid silica framework may prevent surfactants from reaching this preferred volume and/or curvature. Real-time in situ X-ray diffraction is used to monitor the structural evolution of these materials heated under hydrothermal treatments. Because the thermal-driven disorder of the surfactant tails drives the phase transition, we examine four types of composites with varying tail density. Ordinarily, composites consist of surfactants with one 20-carbon tail and one positively charged ammonium headgroup. Tail density is varied by replacing a small amount (0-16%) of these single-tail, single-head surfactants with single-tail, double-head 'gemini' surfactants. A greater head--tail ratio indeed produces different results, causing the phase transition to occur at higher temperatures. Using simple geometric models to gain better understanding of our experimental results, we find that, while both unfavorable curvature and limited volume may exist for the surfactants in these composites, the constrained curvature appears to be the dominant effect in driving structural rearrangement.     

Improved selectivity and detection limit of the carbonate-selective electrode

The properties of the carbonate neutral carrier 4-( n-hexadecyl)-3-nitro-1-trifluoroacetylbenzene were compared with those of a similar carrier, without a nitro group, studied previously. In spite of differences in the Hammett constant of the carbonyl group responsible for interaction with the analyte, the analytical characteristics of both carriers, measured under the same conditions, were comparable. Special care was taken to avoid the presence of an excessive carbon dioxide level in the diffusion layer at the membrane-solution interface. The internal reference solution was prepared without carbonate components; the external solution was protected from contact with atmospheric carbon dioxide. Under such conditions the detection limit of both electrodes was extended to 10(-11 )mol L(-1), and the selectivity towards salicylate, chloride, and acetate was significantly improved.     

Synthetically attractive indolization processes and newer methods for the preparation of selectively substituted indoles

The synthetically interesting processes available for indolization reactions are discussed and illustrated in tabular form and particular emphasis is placed on the more recent methods.     

Flow-injection single-point titration of acids with biamperometric detection at polarized platinum electrodes

Flow-injection single-point titration of acids is based on biamperometric measurement of iodine formed quantitatively in the reaction of iodide with iodate. Results are presented for determination of sulphuric, hydrofluoric, monochloroacetic, formic and acetic acids. The slopes of the calibration plots, which are linear for about 1–10 rum acid, depend on the strength of the acid, decreasing from sulphuric acid to acetic acid. With microcomputer on-line data processing, relative standard deviations were about 0.2%.     

Highly efficient, one-step macrocyclizations assisted by the folding and preorganization of precursor oligomers

Highly efficient, one-step macrocyclizations leading to the formation of macrocyclic hexa(aramides) in high yields (69-82%) are described. The one-step macrocyclizations were facilitated by the preorganization or folding of the backbones of uncyclized precursors in the course of macrocyclization. The preorganization of backbones was achieved by the presence of localized three-centered hydrogen bonds that were adopted in the design of a class of closely related, backbone-rigidified foldamers. The macrocyclization involved reactions between diacid chloride 1 and diamine 2. The crude reaction mixtures and products were conveniently examined by mass spectrometric method (MALDI-TOF). Compared to most traditional one-step macrocyclizations that usually require high dilution conditions and often lead to very low overall yields of the desired products, cyclic hexamers 3 were obtained as the overwhelmingly major product under a variety of reaction conditions, suggesting the generality of this approach.     

Side effects in measurements of selectivity coefficients of solid state ion selective electrodes

The influence of various factors such as solubility, the oxidation of the membrane, and the contamination of the solution, on the experimental values of the selectivity coefficients of solid state sulphide ion selective electrodes is discussed. A new method for the evaluation of very small selectivity coefficients, based on the addition of reagents forming complexes or insoluble salts with the main ion, is proposed. By means of this method, selectivity coefficients for silver, copper, cadmium and lead ion selective electrodes have been determined, which are in far better agreement with thermodynamic values than those described in the literature.     

Micellar ultrafiltration preconcentration of strontium by anionic micellar solution

Th anionic micellar system of the sodium dodecylsulphate (SDS) with di-2-ethylhexylphosphoric acid (D2EHPA) chelating ligand reagent in acctate buffer solutions was studied. The influence of the concentration and the composition of the micellar system for strontium preconcentration was determined. Different pH values of solutions as well as different concentration ratios of the ligand to the surfactant were used.     

Calculations of substituent and solvent effects on the kinetic isotope effects of Menshutkin reactions

Nitrogen, deuterium, halogen, and carbon kinetic isotope effects have been modeled for the Menshutkin reaction between methyl halides and substituted N,N-dimethylaniline at the HF/6-31G(d) level of theory augmented by the C-PCM continuum solvent model for several solvents. Systematic changes in geometries of the transition states and Gibbs free energies of activation have been found with phenyl ring substituents, solvent, and the leaving group. Kinetic isotope effects also change systematically; however, these changes are predicted to be small, inside the usual precision of the experimental measurements. On the contrary, no correlation has been found between the kinetic isotope effects and the Hammett constants for para substituents. Thus opposite to previous assumptions, our results indicate that kinetic isotope effects on the Menshutkin reaction cannot be used to predict the position of the transition state on the reaction coordinate.